Chainsaw is a type of hand-operated machine tool that uses a spinning circular blade to cut wood by cutting at the top and shaving off shavings. The key to using a chainsaw properly is having all the parts working together smoothly, and, in the case of the spark plug, keeping it out of harm’s way until you need it. Learn how to keep your spark plug safe while using your chainsaw in this blog post!
Chainsaw pull starts are a common problem. Many people remove the spark plug to keep the pull start from engaging, but this is not necessary. There are several ways to keep a chainsaw pull start without removing the spark plug.
Some people use a piece of metal with a hole in it to hold down the bar while they start the chainsaw. Others put a clamp on the bar and hold onto the chain with one hand while they crank the pull start with the other. The most common way to keep a chainsaw pull start engaged is to use a key ring or chain keeper. This tool has a hole in it that fits over the crank handle. When you want to start the chainsaw, you simply fit the key ring over the crank handle and turn it back and forth until the chain starts to twirl. The key ring prevents the chain from coming off of the sprocket, which would stop the chainsaw from running.
If your chainsaw won’t start with the spark plug in, there may be a number of reasons. The most common reason is that the chainsaw chain has become tightly bound to the bar and the sprocket, preventing the chain from turning freely. This can happen if the chain became tangled while it was still attached to the bar or if it became wrapped around the sprocket after being pulled off the bar.
The best way to avoid this scenario is to remove the spark plug before starting your chainsaw. If you don’t have time to remove the spark plug, try using a pull start instead of a spark plug. A pull start uses a cable connected between the engine and the starter motor. As you pull on the cable, it causes the engine to start.
Keeping a chainsaw healthy is important for the longevity of the saw. Proper maintenance includes keeping the chain and sprocket lubed, checking the tension on the chain, and keeping the spark plug clean. If you’re having problems starting your chainsaw, there are several things you can do to try and fix the issue.
The first step is to check the chain tension. To do this, use a wrench to turn the adjustment screw located near the bottom of the bar. The tension should be about 12-15 pounds. If it’s lower or higher, adjust accordingly. Keep in mind that you may need to make multiple adjustments as your saw’s chain wears.
The next step is to check for clogs in the chain. A clog is when debris has built up so tightly against one of the saw’s teeth that it stops the chain from spinning freely. To find a clog, put your hand around one of the saw’s teeth and try to pull it sideways. If it starts coming loose easily, you’ve found a clog. Clear out any debris with a pipe cleaner or vacuum cleaner before trying to start your chainsaw again.
Chances are, if you’re reading this article, you know that a chainsaw can be a dangerous tool. But even with all the warnings and precautions we take to avoid injury when using one, accidents happen. In this article, we want to share with you an easy way to keep your chainsaw pull start running smoothly without having to remove the spark plug every time it starts up — no matter how often it happens. By following these simple steps, you should be able to keep your chainsaw running for years without any problems. Thanks for reading!