Electric Stove Burner Not Heating? Troubleshooting & Repair Guide

An electric stove is a kitchen workhorse, but like any appliance, it can encounter problems. One of the most common issues is an electric stove burner not heating. Before you call an expensive repair technician or resort to takeout, try troubleshooting the problem yourself. This guide will walk you through the common causes of a malfunctioning electric stove burner and provide step-by-step instructions on how to fix it.

Safety First!

Before you begin any troubleshooting or repair work, always disconnect the power to your stove. This can be done by unplugging it or switching off the breaker in your electrical panel. Working with electricity can be dangerous, so exercise caution and prioritize safety throughout the process.

Tools You Might Need:

• Multimeter
• Screwdrivers (various sizes and types)
• Pliers
• Replacement burner element (if needed)
• Wire connectors
• Electrical tape

Troubleshooting the Problem

1. Check the Obvious:

   • Is the stove plugged in? It seems simple, but sometimes the most obvious solution is the right one. Make sure the stove is properly plugged into a working outlet.
   • Is the breaker tripped? Check your electrical panel to ensure the breaker that controls your stove hasn’t tripped. If it has, reset it.
   • Is the burner properly plugged in? Electric stove burners have plugs that connect them to the stove’s internal wiring. Make sure the burner in question is securely plugged in. Sometimes these connections can become loose over time.

2. Inspect the Burner Element:

   • Visible damage: Look for any signs of physical damage to the burner element, such as cracks, breaks, or discoloration. If the element is visibly damaged, it will need to be replaced.
   • Burner socket: Examine the burner socket for any signs of burning or corrosion. If the socket is damaged, it may need to be replaced as well.

3. Test the Burner Element with a Multimeter:

   • Continuity test: A multimeter can be used to test if the burner element has continuity, meaning that electricity can flow through it.
     • Set your multimeter to the continuity setting (usually indicated by a sound wave symbol).
     • Touch one probe to each terminal of the burner element.
     • If the multimeter beeps or shows a reading near zero, the element has continuity. If there’s no beep or the reading is infinite, the element is faulty and needs replacement.

4. Check the Stove’s Internal Wiring:

   • Access the wiring: To access the stove’s internal wiring, you’ll usually need to remove the stovetop. Consult your stove’s user manual for specific instructions.
   • Inspect the wires: Once you have access to the wiring, look for any loose connections, burnt wires, or signs of damage. If you find any issues, you may need to repair or replace the wiring. This is a more advanced repair and may require the assistance of a qualified electrician.

Fixing the Problem

Image Source

1. Replacing the Burner Element:

• Purchase a replacement: Make sure to purchase a replacement burner element that is compatible with your stove model. You can usually find these at appliance stores or online.
• Remove the old element: Lift the stovetop and carefully unplug the faulty burner element from its socket.
• Install the new element: Plug the new element into the socket. Make sure it’s securely in place.
• Test the new element: Reconnect the power to your stove and test the new burner element to make sure it’s heating properly.

2. Repairing the Burner Socket:

• If the burner socket is damaged, it’s best to replace it. However, in some cases, you may be able to repair minor damage.
• Clean the socket: Use a small brush or compressed air to clean any debris or corrosion from the socket.
• Tighten connections: If any of the wires connected to the socket are loose, tighten them with pliers.
• Replace the socket (if necessary): If the socket is severely damaged, you’ll need to replace it. This usually involves disconnecting the wires from the old socket and connecting them to the new one.

Samsung Dishwasher Troubleshooting: Fix Blinking Lights & Error Codes

3. Addressing Wiring Issues:

• Tighten loose connections: If you find any loose connections in the stove’s internal wiring, tighten them with pliers or wire connectors.
• Replace damaged wires: If any wires are burnt or damaged, they will need to be replaced. This can be a complex task, so it’s best to consult a qualified electrician if you’re not comfortable working with electrical wiring.

Preventing Future Problems

• Keep your burners clean: Regularly clean your burners to prevent food and grease buildup, which can cause damage over time.
• Avoid using abrasive cleaners: Harsh cleaners can damage the burner elements and sockets. Use a mild cleaner and a soft cloth instead.
• Don’t use oversized pots and pans: Oversized cookware can trap heat and damage the burner elements. Use cookware that is appropriately sized for the burner.
• Be careful not to drop heavy objects on the stovetop: This can damage the burners or the stovetop itself.

You Might Enjoy: Shark Vacuum Troubleshooting: Fix It Yourself!

When to Call a Professional

While this guide covers common solutions for a malfunctioning electric stove burner, some situations may require professional help. If you’re uncomfortable working with electricity, or if you’ve tried troubleshooting the problem without success, it’s best to call a qualified appliance repair technician.

By following these tips and guidelines, you can successfully troubleshoot and repair your electric stove burner, saving yourself time and money. Remember to always prioritize safety and disconnect the power to your stove before beginning any work.

Featured Image Source